Philips WACS7000/05 用户手册
24
English
4. Preparation
4.2.2 Using 2-way remote control
You can choose to use the 2-way remote control
to operate either the Center or the Station.
Depending on the level of interference, you can
also select your preferred operational mode:
Enhanced mode or Normal mode.
to operate either the Center or the Station.
Depending on the level of interference, you can
also select your preferred operational mode:
Enhanced mode or Normal mode.
Center (default):To operate the Center
Station:To operate the Station
Enhanced Mode (default):This mode gives you
better operational range (including distance and
angle). Use this mode if there is no interference
from a plasma TV nearby.
Normal mode: Choose this mode if there is
interference from a plasma TV nearby which is
distorting the display of the 2-way remote
control.
Station:To operate the Station
Enhanced Mode (default):This mode gives you
better operational range (including distance and
angle). Use this mode if there is no interference
from a plasma TV nearby.
Normal mode: Choose this mode if there is
interference from a plasma TV nearby which is
distorting the display of the 2-way remote
control.
1
Press and hold REFRESH until the Select
Device screen appears on the display of the 2-
way remote control.
Device screen appears on the display of the 2-
way remote control.
2
Press the navigation controls
3 or 4 to select
either the Station or Center, then press
2 to
confirm.
3
Press the navigation controls
3 or 4 to select
Enhanced Mode or Normal Mode, then press
2
to confirm.
4
Press OK to confirm.
Helpful hints:
– Avoid placing the Center or Station near to a
– Avoid placing the Center or Station near to a
plasma TV.The interference may distort the
display on your 2-way remote control.
display on your 2-way remote control.
– The status of the Center or Station will be
synchronized onto the display of the 2-way
remote control.With the synchronized display, it
is easier to operate the remote control.
remote control.With the synchronized display, it
is easier to operate the remote control.
– The 2-way remote control with synchronized
display consumes more power than other
remote controls without a display screen.When
the low battery icon (
remote controls without a display screen.When
the low battery icon (
) appears on the
display of the remote control, replace the
batteries.
batteries.
– If you switch on the Center or Station using the
STANDBY-ON/ ECO POWER button on the set,
press REFRESH on the remote control of the
Center to synchronize the remote control
display.
press REFRESH on the remote control of the
Center to synchronize the remote control
display.
– The display of the 2-way remote control
supports 6 European languages: English, French,
Spanish, Dutch, Italian and German.
Spanish, Dutch, Italian and German.
pg001-pg067_WACS7000_UK 2007.1.30 1:51 PM Page 24