KRAM Interface Lead 68735 产品宣传页
产品代码
68735
Installation description
Line-In cable 68735 for
Porsche 911, Cayenne, Boxster & Cayman
1st. Remove the radio and disconnect the ISO connectors from the rear of
the radio. Insert the Interface lead between the connectors on the radio
and the connectors on the cars wiring loom.
the radio. Insert the Interface lead between the connectors on the radio
and the connectors on the cars wiring loom.
2nd. Now you will need to connect the
yellow mute wire. Start by disconnect-
ing the small mute-adaptor labelled
“MUTE 4” from the mute wire. After-
wards connect the mute wire to the
red/white wire labelled “MUTE 3”:
yellow mute wire. Start by disconnect-
ing the small mute-adaptor labelled
“MUTE 4” from the mute wire. After-
wards connect the mute wire to the
red/white wire labelled “MUTE 3”:
3rd. Now the white and the black wire will need to be connected to the
radios telephone input. The radios telephone input is found in the 20 pin
mini ISO slot on the back of the radio. Where to connect the pins depends
on the radio model nr. Please see the diagram below:
radios telephone input. The radios telephone input is found in the 20 pin
mini ISO slot on the back of the radio. Where to connect the pins depends
on the radio model nr. Please see the diagram below:
The Connector is seen from the cable entry side.
If there is no plug in the radio where the wires should be inserted please
insert one of the mini iso plugs delivered with the cable. Warning: Be
sure to connect the black and the white wire to the right positions, else
damage to the radio may occur.
(Continues on next page)
Interface Leads
Interface Leads
Product description
Line-In cable 68735 for
Porsche 911, Cayenne, Boxster & Chayman
Interface Leads are used for car stereos with a Line-In func-
tion or VDA preparation. It enables the use of the car speakers
when answering/making calls from your cell phone. Thereby
using the radios built-in mute function.
Speaker-function: This is achieved by connecting the carkit di-
rectly to the cars Line-In input/VDA connector. By using the
radios built-in relays the telephone conversation is sent
through the car speakers while the radio is muted. This way
you will achieve a perfect hands free sound without interfer-
ence from the car radio.
For a complete cable-set two item no. is required. The first is
a car-specific Interface Lead. The second is a carkit-specific
carkit adaptor cable.
Power supply of the carkit: All Interface Leads are delivered
with a power connector for the carkit. That way you avoid
cutting the cars wiring loom.
Please check the radio instruction manual for special issues
regarding the connection and set-up of the radio when con-
necting a carkit.
tion or VDA preparation. It enables the use of the car speakers
when answering/making calls from your cell phone. Thereby
using the radios built-in mute function.
Speaker-function: This is achieved by connecting the carkit di-
rectly to the cars Line-In input/VDA connector. By using the
radios built-in relays the telephone conversation is sent
through the car speakers while the radio is muted. This way
you will achieve a perfect hands free sound without interfer-
ence from the car radio.
For a complete cable-set two item no. is required. The first is
a car-specific Interface Lead. The second is a carkit-specific
carkit adaptor cable.
Power supply of the carkit: All Interface Leads are delivered
with a power connector for the carkit. That way you avoid
cutting the cars wiring loom.
Please check the radio instruction manual for special issues
regarding the connection and set-up of the radio when con-
necting a carkit.
See our complete Interface program on
www.kram.dk
20 pin Mini ISO
connector
connector
1
4
3
6
7
5
10
2
12
11
13
9
8
16
17 20
14
19
18
15
Radio nr.
CDR-21
CDR-22 CDR-23/24
White
Pin 1
Pin 13
Pin 7
White/
Black
Black
Pin 2
Pin 14
Pin 12
PCM II
Pin 7
Pin 12