Philips DVP3146K/98 用户手册

下载
页码 43
English
13
Connecting to a stereo 
system
Receiver has a PCM, Dolby Digital 
or MPEG decoder
A
  Select one of the video connections 
(CVBS VIDEO IN or COMPONENT 
VIDEO IN) depending on the options 
available on your television.
B
  Connect the COAXIAL jack of the DVD 
player to the corresponding Digital Audio 
In jack on your receiver (cable not 
supplied).
C
  Set the DVD player’s digital output to 
PCM-Only or ALL depending on the 
capabilities of your receiver (see page 34 
{Digital Output}).
Tip:
–  If the audio format of the Digital Output 
does not match the capabilities of your 
receiver, the receiver will produce a strong, 
distorted sound or no sound at all.
Stereo system has right/ left Audio 
In jacks
A
  Select one of the video connections 
(CVBS VIDEO IN or COMPONENT 
VIDEO IN) depending on the options 
available on your television.
B
  Use the audio cables (white/red) to 
connect FRONT OUT (L/R) jacks of the 
DVD Player to the corresponding 
AUDIO IN jacks on the stereo system 
(cable supplied). 
Connecting to a digital AV 
receiver
Optional connections
TIPS:  Before making or changing any connections, make sure that all the devices are disconnected 
from the power outlet.
DIGITAL
OUT
TV OUT
COAXIAL
AUDIO OUT
COMPONENT VIDEO OUT
FRONT R
FRONT L
REAR R
REAR L
SUBWOOFER
CENTER
AUDIO
IN
STEREO
DIGITAL
DIGITAL
OUT
TV OUT
COAXIAL
AUDIO OUT
COMPONENT VIDEO OUT
FRONT R
FRONT L
REAR R
REAR L
SUBWOOFER
CENTER
AUDIO
IN
DIGITAL
AV Receiver
01-43_dvp3146K_98_eng1.indd   13
01-43_dvp3146K_98_eng1.indd   13
2007-01-22   11:30:24 AM
2007-01-22   11:30:24 AM