Philips HDR3700/05 用户手册

17

EN

Connect the unit to a TV after considering the 
capabilities of your existing equipment.

• Switch the input selector on your TV to an 

appropriate external input channel.

• Connect this unit directly to the TV. If the AV cables 

are connected to a VCR, pictures may be distorted 
due to the copy protection system.

• When changing the “Active Video Output” setting to 

“SCART(RGB)”, “Component (Interlace)” or 
“Component (Progressive)”, connect to the 
corresponding jack on the TV. If the setting is 
changed, for example, to “Component (Interlace)” or 
“Component (Progressive)” while the scart cable is 
connected to the TV, a distorted video may be 
output at Scart output for a short while.

• If the external equipment (e.g. cable box, 

Canal+ decoder) is connected to AV2, the picture of 
the external equipment will be output except during 
the DVD playback of this unit. Turn off the external 
equipment or press [DISPLAY] to output the picture 
of this unit.

\R) 

If your TV has Component Video input jacks, use a 
Component Video cable and an Audio cable (to 
connect the AUDIO OUT (ANALOG L

\R) jacks).

• The progressive scan video quality is only available 

when using Component connection and a 
progressive scan TV. It provides superior picture 
quality when watching DVD movies.

\R) jacks of this unit to 

• Switch the input selector on your TV to an 

appropriate external input channel.

• After you have made the connections, set the 

“Active Video Output” setting. (See pages 79 - 80.)

• The default setting is “SCART(RGB)”.
To enable component video connection, you must 
set the unit's video output correctly. 
1

Make an addition video connection from this unit 
to your TV using the supplied Scart cable.

Turn on your TV to the correct viewing channel for 
the Scart connection.

When you have completed the “Initial Setup”, set 
“Active Video Output" to 
“Component(Progressive)” in “HOME” menu.

• If your TV is not compatible with progressive scan, 

set “Active Video Output” setting to “Component 
(Interlace)”.

• Use a commercially available adaptor if the Video input 

jacks of your TVs or monitors are the BNC type.

• Only component and HDMI connections are 

compatible with the Progressive Scan.

Connections

Audio cable (not supplied)

Scart cable (supplied)

RF cable 
(supplied)

To Aerial jack

Antenna

Cable 

Signal

RF cable 
(not supplied)

or

Component Video cable 
(not supplied)

or

E2N41BN_EN.book  Page 17  Wednesday, July 2, 2008  4:36 PM