Husqvarna WH4817EFQ2 用户手册

English-

16

Located in the center of the console. Controls 
the forward speed of the mower. Push the 
lever forward if you want to go faster, pull it 
back to go slower or pull it all the way back to 
the stop postion.

To begin motion, the operator must move the 
ground speed lever forward before 
disengaging the neutral lock bail.

Ground Speed Lever Stop is the adjustment 
screw placed on the front edge of the console 
panel. It is used to insure ground speed lever 
does not over travel motion control levers into 
revese.

The choke control is used for cold starts to 
provide the engine with a richer fuel mixture.

For cold starts the choke control should be 
pulled out.

Push the choke control gradually in when the 
engine is started till the engine runs smoothly. 

Do not use the choke control when starting a 
warm engine.

The ignition key switch is placed on the 
console panel and is also used to start the 
machine when it is equipped with an electric 
starter.

8011-415

8011-690

8011-689