National Instruments 4-Channel 用户手册

Each application software package and driver includes information about 
writing applications for taking measurements and controlling measurement 
devices. The following references to documents assume you have 
NI-DAQmx 8.7 or later, NI-DAQmx Base version 3.x, and where 
applicable, version 7.1 or later of the NI application software.

The DAQ Getting Started Guide describes how to install your NI-DAQmx 
for Windows software, how to install your NI-DAQmx-supported DAQ 
device, and how to confirm that your device is operating properly. Select 
Start»All Programs»National Instruments»NI-DAQ»DAQ Getting 
Started Guide.

The NI-DAQ Readme lists which devices are supported by this version of 
NI-DAQ. Select Start»All Programs»National Instruments»NI-DAQ»
NI-DAQ Readme.

The NI-DAQmx Help contains general information about measurement 
concepts, key NI-DAQmx concepts, and common applications that are 
applicable to all programming environments. Select Start»All 
Programs»National Instruments»NI-DAQ»NI-DAQmx Help.

For information about non-Windows operating system support, refer to 

ni.com/info

 and enter 

BaseGSGML

.

If you are a new user, use the Getting Started with LabVIEW manual to 
familiarize yourself with the LabVIEW graphical programming 
environment and the basic LabVIEW features you use to build data 
acquisition and instrument control applications. Open the Getting Started 
with LabVIEW manual by selecting Start»All Programs»National 
Instruments»LabVIEW»LabVIEW Manuals or by navigating to the 

labview\manuals

 directory and opening 

LV_Getting_Started.pdf

.