Husqvarna iZ4817TSKAA 用户手册
English-
61
LUBRICATION
12. Brake Arms
Remove one rear wheel at a time (four
screws).
screws).
Lubricate with a grease gun, one zerk for
each brake arm, until the grease is forced
out.
each brake arm, until the grease is forced
out.
Use only good quality molybdenum
disulphide grease.
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
(petrochemical companies, etc.) usually
maintains a good quality.
13. Belt Adjuster, Hydraulic Pumps
Lubricate using a grease gun, one zerk, until
the grease squeezes out.
the grease squeezes out.
Use only good quality molybdenum
disulphide grease.
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
(petrochemical companies, etc.) usually
maintains a good quality.
8011-579
Lubricating brake arms
IMPORTANT INFORMATION
Use minimal lubrication and remove excess
lubricant so that is does not come into
contact with the brake band.
Use minimal lubrication and remove excess
lubricant so that is does not come into
contact with the brake band.
8011-575
Lubricating the belt adjuster
IMPORTANT INFORMATION
Use minimal lubrication and remove excess
lubricant so that is does not come into contact
with belts or belt pulley drive surfaces.
Use minimal lubrication and remove excess
lubricant so that is does not come into contact
with belts or belt pulley drive surfaces.