Sony LF-X1 用户手册

F:\Joutou\#4090332_Sony_LF-X\4103221121up\4103221121\4103221121LF-
X1\00GB12C08-WW.fm

LocationFreeTV

4-103-221-12(1)

135

• Check that the base station is turned on. Bring 

the monitor close to the base station.

• Be sure to initialize the LocationFreeTV with 

the AC power adapter attached and the battery 
inserted.

• The monitor restarts during the initialization 

process. This is not a malfunction.

To reset all settings, or just the connection 
settings, you need to initialize the base station.

Turn off the base station.

While pressing CLR CFG on the rear of the 
base station, turn on the POWER.
Hold down CLR CFG until the NetAV 
indicator on the front of the base station 
lights red.

You can reset all settings to the factory defaults. 
Note, however, that all saved data will be lost.

• Initialization deletes all of your data, including mail 

you have received, images stored in the album, as 
well as web pages and favorites you have saved.

• Be sure to follow the instructions for “Initializing the 

Base Station” before performing the following 
procedure.

Open the [Settings] window and select 
[Basic].
The [Basic] window appears.

Select [Initialize].
The [Initialize] window appears.

Select [Clear All].
The [Clear All] window appears.

Carefully read the precautions shown on the 
screen, initialize the base station 
(

1 This page), and select [OK].

All settings are reset.

After the monitor automatically restarts during 
initialization, verify that 

 appears at the 

top of the screen.

• Use the following procedure to reset the 

settings for the Internet connection, wireless 
connection, and connection mode.

• Be sure to follow the instructions for 

“Initializing the Base Station” before 
performing the following procedure.

Rear of 
base station

Front of 
base station

CLR CFG

NetAV indicator