Sony LF-X1 用户手册

F:\Joutou\#4090332_Sony_LF-X\4103221121up\4103221121\4103221121LF-
X1\00GB14C10-WW.fm

LocationFreeTV

4-103-221-12(1)

141

If a problem occurs during operation of the LocationFreeTV, refer to the information provided in this 
section. If the problem persists, contact your Sony dealer.

Blinks red

The battery may have 
malfunctioned.

1

Remove the AC power adapter and the 
battery. Reinstall the battery.

2

If the problem persists, contact your Sony 
dealer.

Monitor does not turn on.

• Connect the AC power adapter (

1 page 26).

Monitor suddenly turns off.

• Make sure the sleep timer has not been set to activate (

• The battery may be dead. Try replacing it. Batteries can be recharged 

about 300 times before needing replacement.

• The monitor may have automatically turned off the power because the 

temperature elevation reached the safety limit (LF-X5 only).

* appears.

* This icon only appears in Home-

Wireless mode.

• Make sure the base station is turned on.
• Move to a location where 

 appears; or change the height and 

orientation of the base station.

• If a nearby device, such as another wireless access point, is operating 

on the same wireless channel as the signal from the base station, change 
the setting on the wireless access point (

• Wireless communications might be interfered by radio waves. Change 

the wireless channel or move to a location free from radio interference 
(

• When using the 2.4 GHz channel:

- Make sure a microwave oven is not in use nearby. Interference from a 

microwave to the wireless signal will stop when the oven is no longer 
in use.

- Are you using a 2.4 GHz cordless phone in the vicinity? A cordless 

phone turned on in the vicinity can interfere with the signal. Change 
the wireless channel.

Screen suddenly goes dark.

With the Web, Mail, Album, or Settings window displayed, the power 
save timer activated and turned off the backlight of the screen. Touch the 
screen or press any button to illuminate the screen. If you prefer, 
deactivate the power save timer (

Screen is too dark.

Adjust the Backlight in the settings window.

On-screen buttons do not respond.

• When the [Index] window or a dialog message is displayed, you cannot 

select any button outside of that window or message.

• Dimmed buttons cannot be selected. Some buttons can only be selected 

after selecting a check box.

A different button than the one you 
selected responds.

The screen is not aligned with the stylus. See “Stylus Calibration”. 
(

(Red)

LF-X1

(Red)

LF-X5