Sony LF-X1 用户手册

F:\Joutou\#4090332_Sony_LF-X\4103221121up\4103221121\4103221121LF-
X1\00GB05C01-WW.fm

LocationFreeTV

4-103-221-12(1)

32

To connect a device such as a set-top box (STB) 
using an antenna cable, proceed as follows. 
Before making the following settings, connect the 
set-top box to the base station. Also set up and 
connect the IR Blaster. 
For more on how to connect to devices, 
see page 21. For more on how to set up and 
connect the IR Blaster, see page 33.

Open the [Settings] window and select [TV/
Video].
The [TV/Video] window appears.

Select [Channel Settings].
The [Channel Settings] window appears.

Select [OFF] under [CABLE], turn on the 
set-top box, then select [Auto Program].

If the set-top box is turned off, channels received 
by the set-top box cannot be preset automatically. 
Make sure the set-top box is turned on.

When channel scanning ends successfully, 
the message “Automatic channel scan has 
finished.” appears.

Confirm the message, and then select [OK]. 

Select [Back]. 
The [TV/Video] window reappears.

Select [Settings], then select [Exit].
A TV program appears.
Make sure the programs that appear are from 
the STB and not the internal tuner. Then 
proceed with the remote control settings. 

If programs from the STB do not appear at this 
point, touch the screen and use the on-screen 
remote to select channel 3 or 4, whichever 
displays the STB programs.

Open the [Settings] window and select [TV/
Video].
The [TV/Video] window appears.

Select [Remote].
The [Remote] window appears.

Select [TV].
On the [Remote Settings] window, you can 
configure the on-screen remote control.
The [TV] window appears.

Select [External TV tuner], and select the 
make and type of the connected device, then 
press [Power].

When the device is configured correctly, you 
can turn it on and off by selecting [Power]. 
Use the sub-screen to confirm that the power 
turns on and off. 
If selecting [Power] several times does not 
turn on and off the connected devices, make 
sure the make and type you have selected are 
correct.

• Even if the power turns on and off correctly 

with [Power], other buttons may not be 
enabled. If this happens, select [Video 1] or 
[Video 2] from the Index. With the on-screen 
remote that appears when you touch the screen, 
confirm that the buttons are enabled by 
pressing them.