Sony LF-X1 用户手册

F:\Joutou\#4090332_Sony_LF-X\4103221121up\4103221121\4103221121LF-
X1\00GB05C01-WW.fm

LocationFreeTV

4-103-221-12(1)

49

Open the [Settings] window and select 
[Monitor].
The [Monitor] window appears.

Select [Wireless] under [On the go].

Select [Back].
The connection mode is changed.

For more on setting the IP address in [Wireless] 
under [On the go], refer to “Setting Up 
the Monitor” on page 54. In that case, however, 
step 2 should read “Select [Settings] to the right 
of [On the go - Wireless].”
Also, for more on settings necessary for watching 
TV, refer to “Setting Up NetAV” on page 56. The 
settings under “Setting Up to Use Public Wireless 
Access” on this page are also necessary.

Follow the steps below to configure the monitor 
so it can use public wireless access at cafes, 
bookstores, and other locations around town. For 
convenience, you can save the configuration of 
public wireless access you visit frequently.
The following is an example of how to establish a 
connection. The actual connection method differs 
depending on the public wireless access provider. 
For details, refer to the instruction manual 
provided by your public wireless access provider.

Open the [Settings] window and select 
[Monitor].
The [Monitor] window appears.

Select [Settings] to the right of [Wireless] 
under [On the go].
The [On the go-Wireless] window appears.

Select [Public Wireless Access].
The [Public Wireless Access] window 
appears.
A short while after the [Public Wireless 
Access] window appears, a list of detected 
access points is displayed.

When the monitor is not set to [On the go-
Wireless], you cannot select [Public Wireless 
Access].

z 

You can also update the wireless network list by 
selecting [Search/Update].