Husqvarna 346XP EPA II 用户手册

 

8 – 

 

English

 

The muffler is designed to keep noise levels to a minimum and 
to direct exhaust fumes away from the user.

In areas with a hot, dry climate there is a high risk of fires. 
These areas are sometimes controlled by legislation and 
requirements that among other things the muffler must be 
equipped with an approved type of spark arrestor mesh.

For mufflers it is very important that you follow the instructions 
on checking, maintaining and servicing your machine. See 
instructions under the heading Checking, maintaining and 
servicing the machine’s safety equipment.

  

′′′′

 

Brush off any wood dust, resin and dirt from the chain brake 
and clutch drum. Dirt and wear can impair operation of the 
brake.

Regularly check that the brake band is at least 0.6 mm thick 
at its thinnest point.

 

Make sure the front hand guard is not damaged and that there 
are no visible defects such as cracks.

Move the front hand guard forwards and back to make sure it 
moves freely and that it is securely anchored to the clutch 
cover.

 

Hold the chain saw over a stump or other firm object. Let go 
of the front handle so that the bar drops towards the stump as 
the chain saw rotates around the rear handle.

 

Place the chain saw on firm ground and start it. Make sure the 
chain does not touch the ground or any other object. See the 
instructions under the heading Start and stop.

  

′′′′