Husqvarna 445 EPA II 用户手册

下载
页码 40
English
 – 21
STARTING AND STOPPING
Note! Pull the front hand guard towards the front handle. 
The chain brake is now disengaged.
 Your saw is ready for 
use.
Never start a chain saw unless the bar, chain and all 
covers are fitted correctly. See instructions under the 
heading Assembly. Without a bar and chain attached to 
the chain saw the clutch can come loose and cause 
serious injury.
The chain brake should be activated when starting. Se 
instructions under the heading Start and stop. Do not drop 
start. This method is very dangerous because you may 
lose control of the saw.
Never start the machine indoors. Exhaust fumes can be 
dangerous if inhaled.
Observe your surroundings and make sure that there is no 
risk of people or animals coming into contact with the 
cutting equipment.
Always hold the saw with both hands. The right hand 
should be on the rear handle, and the left hand on the front 
handle. All people, whether right or left handed, should 
use this grip. Use a firm grip with thumbs and fingers 
encircling the chain saw handles.
Stopping
Stop the engine by switching off the ignition.
CAUTION! The stop switch automatically reverts to start 
position. To avoid involuntary start up, the ignition fuse must 
always be removed from the spark plug when the machine is 
unsupervised.
!
WARNING! Long term inhalation of the 
engine’s exhaust fumes, chain oil mist and 
dust from sawdust can represent a health 
risk.