Husqvarna 580 R 用户手册

GB - 22

1. Fuel tank empty or low.
2. Spark plug wire loose or off.
3. Engine/brake control cable 

detached, broken, or not 
adjusted properly.

4. Battery discharged (electric 

start models).

1. Check fuel level. Fill tank if 

necessary.

2. Check connection.
3. Check engine/brake 

control cable. Adjust, 
repair or replace as 
necessary.

4. Charge battery or replace 

if necessary.

1. Traction drive bail not 

engaged.

2. Drive belt out of position.
3. Drive belt worn or 

damaged.

4. Rear wheels in different 

cutting height positions.

5. Friction wheel engagement 

not adjusted properly or 
damaged.

6. Idler and idler spring 

installed incorrectly.

7. Traction drive cable 

detached or broken.

8. Bearings damaged.
9. Debris in gear set.

1. Engage traction drive bail.
2. Check drive belt. Adjust as 

necessary.

3. Replace belt.
4. Adjust rear wheel cutting 

position so that cutting 
height is the same on both 
sides.

5. Adjust or replace friction 

wheel.

6. Check idler and spring. 

Adjust as necessary.

7. Check drive cable. Adjust, 

repair or replace as 
required.

8. Replace bearings.Contact 

your Dealer.

9. Remove debris. Contact 

your Dealer.

See your authorized Husqvarna dealer to 
add these optional accessories. 

606 00 00 01

Dethatcher

606 00 00 02

Swivel Wheel

606 00 02 30

Battery Charger