Husqvarna LZ7230 用户手册

English

-

50

Remove the ignition key to prevent unintentional movements during lubrication.

When lubricating with an oil can, it must be fi lled with engine oil.

When lubricating with grease, unless otherwise stated, use a high grade molybdenum disulphide grease.

For daily use, the machine shall be lubricated twice weekly.

Wipe away excess grease after lubrication.

It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. Should this happen, 
attempt to clean them with spirits. If the belt continues to slip after cleaning, it must be replaced. Gasoline or other 
petroleum products must not be used to clean belts.

8011-673

 

12/12=  Every year  

Lubricate with grease gun 

Lubricate with oil can

 

1/52=  Every Week  

Oil change 

Level check

 

1/365=  Every day  

Filter change