Husqvarna LZ6130C 用户手册

English

-

56

Tip the driver’s seat.

Lubricate with a grease gun, one zerk for each 
steering control shaft, until the grease is forced out.

Use only good quality molybdenum disulphide grease.

Grease from well-known brand names (petrochemical 
companies, etc.) usually maintains a good quality.

Lubricate with a grease gun, one zerk for each strut, 
until the grease is forced out.

Use only good quality molybdenum disulphide grease.

Grease from well-known brand names (petrochemical 
companies, etc.) usually maintains a good quality.

8011-578

8011-577-1

1.  Drain the engine oil in accordance with the 

work description under the heading “Engine 
Oil/Change Engine Oil”. 

2.  Remove the oil fi lter. If necessary, use a fi lter 

remover.

3.  Wipe new, clean engine oil onto the seal for 

the new fi lter.

4. Mount 

the 

fi lter by hand with a ¾ turn.

5.  Run the engine warm, then check that there 

are no leaks around the oil fi lter seal.

6.  Check the oil level in the engine, top up 

if necessary. The oil fi lter holds 0.2 qt. 
(0.2 liters) of oil.

8011-745