Vidikron VL 52 用户手册
10
Vidikron VL-52 and VL-57 Owner’s Operating Manual
PRE
L
IMINAR
Y
1.
OFF / ON
Use these buttons to turn the DView on or off.
2.
Numeric Buttons
Use these buttons to enter menu pass codes.
VL-52 only: Use the numeric buttons to enter TV channel numbers. Use the TV button
to switch to the Antenna/DTV/CATV input. Use the
-
button to enter DTV sub-channel
numbers.
3.
Source Selection Buttons
INPUT 1
Press this button to switch to Input 1.
INPUT 2
Press this button to switch to Input 2.
INPUT 3
Press this button to switch to Input 3.
INPUT 4
Press this button to switch to Input 4.
HDMI 1 / HDMI 2
Use these buttons to select a Digital Video input (HDMI 1 or HDMI 2).
RGB HD
Press this button to switch to the RGB HD input.
4.
Memory Preset Buttons
CUST
Press to recall settings for the current input from the “Custom” memory preset.
ISF NT (Night)
Press to recall settings for the current input from the “ISF Night” memory preset.
ISF DAY
Press to recall settings for the current input from the “ISF Day” memory preset.
Input 1 and Input 2 have both S-Video and composite video connectors.
Input 3 and Input 4 have both component and composite video
connectors.
Input 3 and Input 4 have both component and composite video
connectors.
To specify which connection type you are using – or to switch from one to
the other if equipment is connected to both – use the Input Selection menu
under Setup (refer to Input Selection on page 38).
the other if equipment is connected to both – use the Input Selection menu
under Setup (refer to Input Selection on page 38).
Note