National Instruments SCXI -1125 用户手册

Refer to the SCXI Quick Start Guide to install the cable adapter and connect 
the SCXI modules to the DAQ device.

If you have already installed the appropriate software, refer to Chapter 3, 

, to configure the SCXI-1125 module(s).

Refer to the SCXI Quick Start Guide to connect the SCXI modules to the 
DAQ device.

If you have already installed the appropriate software, refer to Chapter 3,

 

, to configure the SCXI-1125 module(s).

If you are not using an NI ADE, using an NI ADE prior to version 7.0, or are using 

an unlicensed copy of an NI ADE, additional dialog boxes from the NI License Manager 
appear allowing you to create a task or global channel in unlicensed mode. These messages 
continue to appear until you install version 7.0 or later of an NI ADE.

This section describes where users can access each software-configurable 
setting for modification in MAX. The location of the settings varies 
depending on the version of NI-DAQ you use. Refer to either the 

 section or the 

 section. You also 

can refer to the DAQ Getting Started Guide and the SCXI Quick Start Guide 
for more information on installing and configuring your hardware. You also 
can use the DAQ Assistant to graphically configure common measurement 
tasks, channels, or scales.