Bertazzoni C36500X 用户手册

 

4

Never use abrasive cleaners 

Before cleaning the appliance it should be disconnected from the power supply. 
Cleaning the work surface: periodically clean the burner heads, the cast iron pan supports and the burner caps using 
warm water. 
Any spillage must always be removed as soon as possible using a rag. 
If it become difficult to open or close a valve, do not force it, but immediately request the assistance of the 
technical service personnel. 

Cleaning the enamelled parts: Enamelled parts should be cleaned frequently with soapy water. Never use abrasive 
powder. Do not leave acidi or alkaline substances on the enamelled parts (such as vinegar, lemon juice, salt, tomato 
sauce, etc.) and do not wash the enamelled parts while they are still hot. 

Cleaning the stainless steel parts: Clean the parts with soapy water and dry them with a soft cloth. The shine is 
maintained by periodically using specific stainless steel cream cleaner. Never use abrasive powders. Use specific 
stainless steel cream cleaner to eliminate the glue remains afther the elimination of the blue plastic protection film on the 
worktop after installation. 

Cleaning the burner caps: Lift the burner caps from the burner heads and wash them in soapy water and dry 
thoroughly. Before replacement on the burner head ensure that the holes are not clogged. 
 

ATTENTION: for further details about cleaning of the appliance, please contact your applliance retailer.

 

Please note here below details for after save service. 

Refer to warranty certificate for warranty condiftions