Husqvarna iZ4817TSKAA 用户手册
25
Torque Specifications
·
Engine crankshaft bolt
67 Nm(50 ft/lb)
·
Deck pulley bolts
61 Nm (45 ft/lb)
·
Hydraulic tube nuts
41 Nm (30 ft/lb)
·
Wheel motor hub nut
122 Nm (90 ft/lb)
·
Lug nuts
100 Nm (75 ft/lb)
·
Blade bolt
122 Nm (90 ft/lb)
·
Standard ¼” fasteners
12 Nm (9 ft/lb)
·
Standard 5/16” fasteners
25 Nm (18 ft/lb)
·
Standard 3/8” fasteners
44 Nm (33 ft/lb)
·
Standard 7/16” fasteners
(seat belt)
(seat belt)
70 Nm (52 ft/lb)
·
Standard ½” fasteners
(roll bar)
(roll bar)
110 Nm (80 ft/lb)
MAINTENANCE
Winter storage
To prepare the machine for storage. Clean the
machine, especialy under the deck. Touch-up the
paint or spray the underside of deck with a light
coat of oil.
Inspect the machine for damage and loose hard-
ware.
Change the oil.
Drain the fuel system or add stabilizer to fuel. Make
sure to run the machine after to circulate stabilizer
throughout system.
Remove the plugs and add 1 tablespoon of oil in
each cylinder. Install plugs and crank the engine
two or three revolutions.
Grease all zerks.
Remove battery and store inside and protect it from
freezing temperatures.
To prepare the machine for storage. Clean the
machine, especialy under the deck. Touch-up the
paint or spray the underside of deck with a light
coat of oil.
Inspect the machine for damage and loose hard-
ware.
Change the oil.
Drain the fuel system or add stabilizer to fuel. Make
sure to run the machine after to circulate stabilizer
throughout system.
Remove the plugs and add 1 tablespoon of oil in
each cylinder. Install plugs and crank the engine
two or three revolutions.
Grease all zerks.
Remove battery and store inside and protect it from
freezing temperatures.