Wasp WLS9500 用户指南

Symbologies 7-33

To enable or disable Code 11, scan the appropriate bar code below.

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the 
code contains. Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within a specific range.

•

One Discrete Length - Select this option to decode only Code 11 symbols containing a selected length. Select 
the length using the numeric bar codes in 

. For example, to decode only Code 

11 symbols with 14 characters, scan Code 11 - One Discrete Length, then scan 1 followed by 4. To correct an 
error or to change the selection, scan Cancel on page 

C-4.

•

Two Discrete Lengths - Select this option to decode only Code 11 symbols containing either of two 
selected lengths. Select lengths using the numeric bar codes in 

. For example, 

to decode only those Code 11 symbols containing either 2 or 14 characters, select Code 11 - Two Discrete 
Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan Cancel on 
page 

C-4

.

•

Length Within Range - Select this option to decode a Code 11 symbol with a specific length range. 
Select lengths using numeric bar codes in 

Appendix C, Numeric Bar Codes. 

For example, to decode Code 

11 symbols containing between 4 and 12 characters, first scan Code 11 - Length Within Range. Then scan 
0, 4, 1, and 2 (single digit numbers must always be preceded by a leading zero). To correct an error or change 
the selection, scan Cancel on page 

C-4

.

•

Any Length - Scan this option to decode Code 11 symbols containing any number of characters within the 
scanner capability.