Wasp WLS9500 用户指南

Miscellaneous Scanner Options 8-3

This chapter includes commonly used bar codes to customize how data is transmitted to the host device. 

The scanner ships with the settings shown in the Miscellaneous Scanner Options Default Table on page 8-4 (also see 

 for all host device and miscellaneous scanner defaults). If the default values 

suit requirements, programming is not necessary. 

To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in non-volatile memory 
and are preserved even when the scanner is powered down.

If not using a Synapse or USB cable, select a host type (see each host chapter for specific host information) after the 
power-up beeps sound. This is only necessary upon the first power-up when connected to a new host.

To return all features to default values, scan a default bar code in Default Parameters on page 4-5. Throughout the 
programming bar code menus, default values are indicated with asterisks (

).

In most cases, scan one bar code to set a specific parameter value. Other parameters, such as Prefix Value, require 
scanning several bar codes. See each parameter for descriptions of this procedure.

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Feature/Option

*

 Indicates Default

Hex Value