Wasp WLS9500 用户指南

1-4

To connect the interface cable:

1. Insert the interface cable’s modular connector clip into the cable interface port on the bottom of the scanner 

handle.
(See 

Figure 1-2

.).

2. Gently tug the cable to ensure the connector is properly secured.
3. Connect the other end of the interface cable to the host. (See the specific host chapter for information on host 

connections.)

Different cables are required for different hosts. The connectors illustrated in each host chapter are 
examples only. Actual connectors may be different than those illustrated, but the steps to connect 
the scanner remain the same.

Interface cable

modular connector

To host

Cable

interface

Interface cable 
modular connector clip