Wasp WLS9500 用户指南

6-4

To set up the scanner:

Interface cables vary depending on configuration. The connectors illustrated in 

Figure 6-1

are 

examples only. The connectors may be different than those illustrated, but the steps to connect the 
scanner remain the same.

1. Attach the modular connector of the USB interface cable to the cable interface port on the scanner (see Installing 

the Interface Cable on page 1-4).

2. Plug the series A connector in the USB host or hub.
3. Select the USB device type by scanning the appropriate bar code from USB Device Type on page 6-5.
4. On first installation when using Windows, the software prompts to select or install the Human Interface Device 

driver. To install this driver, provided by Windows, click Next through all the choices and click Finished on the 
last choice. The scanner powers up during this installation.

5. To modify any other parameter options, scan the appropriate bar codes in this chapter.

If problems occur with the system, see Troubleshooting on page 3-3.

Table 6-1

 lists the defaults for USB host parameters. If any option needs to be changed, scan the appropriate bar code(s) 

provided in the Parameter Descriptions section beginning on page 

6-5

.

See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and 
miscellaneous default parameters.

USB Device Type

HID Keyboard Emulation

6-5

USB Country Keyboard Types (Country Codes)

North American

6-6

USB Keystroke Delay

No Delay

6-8

USB CAPS Lock Override

Disable

6-8

USB Ignore Unknown Characters

Send

6-9

Emulate Keypad

Disable

6-9

USB FN1 Substitution

Disable

6-10

Function Key Mapping

Disable

6-10

Simulated Caps Lock

Disable

6-11

Convert Case

No Case Conversion

6-11