Panasonic AG-HMC40 用户指南
83
Editing
Computer (non-linear editing/file transfer)
ヶヴャビハパ
ヮリヤ
ヶヴャビハパ
ヮリヤ
Computer
USB connection cable
(optional)
Mini-B
Ferrite core (included)
For details on the computer’s conditions and other factors, see page 85.
When connecting the camera with a PC using a USB connection cable,
attach the two ferrite cores (included) to the USB connection cable, one at a
position about 5 cm from the PC terminal and the other at a position about
5 cm from the camera terminal. After attaching the cable as shown in the
diagram on the right, close the terminal so that it clicks and locks into place.
attach the two ferrite cores (included) to the USB connection cable, one at a
position about 5 cm from the PC terminal and the other at a position about
5 cm from the camera terminal. After attaching the cable as shown in the
diagram on the right, close the terminal so that it clicks and locks into place.
•
Always take sufficient care when handling the ferrite core, as it can be easily damaged when dropped or
subjected to other impact.
Please use a USB connection cable that is shielded and no more than 3 meters long.
subjected to other impact.
Please use a USB connection cable that is shielded and no more than 3 meters long.
•
•
Video deck (Dubbing)
Video and audio output will be limited to that from the camera.
A/V OUT
AV cable (included)
Connect these cables
to the terminals on the
video deck.
VCR
When outputting video and audio signals from the camera to an external device, connect to the
input terminals of the external device.
•
■