GE PDCF1NBX 用户指南

Installation Instructions

REMOVE THE FRESH FOOD
DOOR HANDLE

(For placement in the installation location or
reversal of the handles – on some models)

Stainless steel (on some models):

REMOVING
THE DOOR
HANDLE: Loosen
the set screws
with the 3/32

″

Allen wrench
and remove
the handle. NOTE:
For Double Door
models follow the
same procedure
on the opposite
door.

Plastic handle (on some models):

REMOVING THE DOOR HANDLE: Depress the
tab on the underside of the handle and slide
the handle up and off of the mounting
fasteners.
REVERSING
THE DOOR
HANDLE (on
some models):
• Remove

the handle
mounting
fasteners with
a 1/4

″ Allen

wrench and
transfer the
handle
mounting
fasteners to
the right side.

• Remove the

logo badge.

• Remove and transfer the plug button to

the left side of the fresh food door. NOTE:
Use a flat plastic edge to prevent damaging
the door. Remove any adhesive on the door
with a mild detergent. Remove the paper
covering on the adhesive backing on the logo
badge prior to carefully attaching the badge
to the door.

Mounting
Fasteners

Badge

(appearance may vary)

REMOVE THE FREEZER DOOR
HANDLE

Stainless steel and plastic handles:

Loosen the set screws located on the underside
of the handle with a 1/8

″ or 3/32″ Allen wrench

and remove the handle.

NOTE: If the handle mounting fasteners need to be
tightened or removed, use a 1/4

″ Allen wrench.

INSTALLING THE REFRIGERATOR

(cont.)