Bosch ltc-0335-28 安装指导
Bosch Video Management System
Devices page | en
103
Bosch Sicherheitssysteme GmbH
Configuration Manual
Configuration Client | V3 | 2010.07
Name:
Type the name of the new virtual inputs. A consecutive number is appended.
Add
Click to add the new virtual inputs.
17.18
SNMP page
Main window >
Devices > Expand
>
Allows you to add or configure an SNMP measurement for maintaining the network quality.
17.18.1
Add SNMP dialog box
Main window >
Devices > Expand
> Right-click
> Add SNMP command
Allows you to add a network monitoring system to your Bosch Video Management System.
Name:
Type a name for the network monitoring device.
17.18.2
SNMP Trap Receiver page
Main window >
Devices > Expand
> Expand
for the selected device when they are received.
SNMP Trap Sending Devices:
Allows you to enter a range of IP addresses of the monitored network devices. To monitor a
single device enter the corresponding IP address in the Range From cell.
Be careful when changing these addresses. Entering a wrong address stops network
SNMP Trap Filter Rules:
Allows you to enter OIDs and corresponding values. You can use wildcards as * and ? to
enhance the filter range. If you enter OIDs and values in more than one row, these filter rules
must match simultaneously to trigger an event. In both columns, you can enter a regular
expression in {}. If there are characters outside the brackets, the regular expression is not
evaluated.
Show Trap Logger Tool
Click to display the SNMP Trap Logger dialog box for tracing SNMP trap OIDs.
17.18.3
SNMP Trap Logger dialog box
Main window >
Devices > Expand
> Expand
> Select a generic SNMP Trap
Receiver > Click Show Trap Logger Tool
NOTICE!
You must enter the IP address of the Bosch Video Management System Central Server as the
trap receiver in your devices that you want to monitor.