Bosch ltc-0335-28 安装指导

Bosch Video Management System

 Encoders / Decoders page | en

Bosch Sicherheitssysteme GmbH

Configuration Manual

Configuration Client | V3 | 2010.07

To rename the VCA profile:

Click . 

The 

Edit dialog box is displayed. Type the new name, and then click OK.

Displays the current alarm state to check the effects of your settings immediately.

You can set an aggregation time of between 0 and 20 seconds if necessary. The aggregation 

time always starts when an event occurs. All following events that occur during the 

aggregation time are counted as one event. This ensures that events following in quick 

succession do not trigger many alarms. During the aggregation time no further event is 

counted.

The post-alarm time set for alarm recordings only starts once the aggregation time has 

expired.

Select the analysis algorithm. By default, only MOTION+ is available. MOTION+ offers a motion 

detector and essential tamper detection functionality.

Additional analysis algorithms with comprehensive functions, such as IVA, are available from 

Bosch Security Systems.

Metadata is always created for a video content analysis, unless this was explicitly excluded. 

Depending on the analysis type selected and the relevant configuration, additional 

information overlays the video image in the preview window next to the parameter settings. 

With the MOTION+ analysis type, for example, the sensor fields in which motion is recorded 

will be marked with rectangles.

Click to load a stored profile. The the Open dialog box is displayed. Select the filename of the 

profile you want to load, and then click OK.

Click to save the profile. The Save dialog box is displayed. Type the filename, select the folder 

where to store the file, and then click OK.

Click to change the current settings to the factory settings.

Reflections of light (from glass surfaces, etc.), lights switching on and off, or changes in the 

light level caused by cloud movement on a sunny day can trigger unintended responses from 

the motion detector and generate false alarms. For indoor surveillance, ensure constant 

lighting of the areas during the day and at night. Run a series of tests at different times of the 

day and night to ensure that the video sensor is operating as intended.

The debounce time is intended to prevent very brief events from triggering individual alarms. 

If the Debounce time 1s option is activated, an event must last at least 1 second to trigger an 

alarm.

Click to configure the areas to be monitored by the motion detector. The Select Area dialog 

box is displayed.