Bosch ltc-0335-28 安装指导

en | Configuring NVRs

Bosch Video Management System

Configuration Client | V3 | 2010.07

Configuration Manual

Bosch Sicherheitssysteme GmbH

You can perform the following tasks to configure a selected Redundant NVR:

–

Configuring video and audio storage

–

Assigning NVRs 

1.

Click the Global Settings tab to display network settings of the selected Redundant NVR.

2.

Click the Disk Storage tab to configure the storage settings of the selected Redundant 

NVR.

3.

Click the Camera Storage tab to configure the camera settings of the selected 

Redundant NVR. This page is only available, if on the Assigned NVR page the Backup 

option is checked.

4.

Click the Assigned NVR tab to add or remove NVRs to the selected Redundant NVR

For detailed information on the various fields, see the Online Help for the appropriate 

application window.

Main window > 

 Devices > Expand 

 > Expand 

or

Main window > 

 Devices > Expand 

 > Expand 

For an NVR, you can configure a Failover NVR that takes over the tasks of the NVR if it fails. 

Ensure that an NVR is switched to a Failover NVR.

You can easily configure several NVRs to have a Failover NVR assigned.

1.

Expand .

2.

Select an NVR as required.

3.

Click the Global Settings tab.

4.

In the Failover NVR list, select the required Failover NVR.

1.

Expand .

2.

Select the desired Failover NVR.

3.

Click the Assigned NVRs tab.

4.

In the Time [h] column, select the required NVRs.

5.

Click Add NVR.

Each added Primary NVR has the selected Failover NVR assigned. 

Main window > 

 Devices > Expand 

 > Expand 

You can only assign one NVR to a Redundant NVR. If you select a Primary NVR that already has 

been assigned to another Redundant NVR, the assignment to the previous Redundant NVR is 

removed.

Ensure that an NVR is switched to a Redundant NVR.

1.

Select the desired Redundant NVR.