Bosch ltc-0335-28 安装指导
76
en | Configuration examples
Bosch Video Management System
Configuration Client | V3 | 2010.07
Configuration Manual
Bosch Sicherheitssysteme GmbH
15
Configuration examples
This chapter contains examples on how to configure selected devices in Bosch Video
Management System.
The following examples are available:
–
–
–
15.1
Adding a Bosch ATM/POS bridge
This example describes how to set up a Bosch ATM/POS bridge.
Configuring the ATM/POS bridge
1.
Ensure that the device is powered.
2.
To configure the IP address and subnet mask of the device connect it to a COM port of
your computer with a RS232 cable (use the specified Bosch cable for connection). See
the Installation Manual of the Bosch ATM/POS bridge for details.
3.
On this computer, start a Hyper terminal session (usually: Start > Programs >
Accessories > Communications > Hyper Terminal).
4.
Type a name for the session and click OK.
5.
Select the COM port number and click OK.
6.
Enter the following COM port settings:
–
9600 bits/s
–
8 data bits
–
no parity
–
1 stop bit
–
hardware flow control
Click OK.
7.
Press F1 for displaying the system options menu of the device.
8.
Enter 1 to set the IP address and the subnet mask as required.
9.
Leave the default settings for the ports:
–
port1: 4201
–
port2: 4200
Adding the ATM/POS bridge to Bosch Video Management System
1.
Connect the device to your Bosch Video Management System network.
2.
Start Configuration Client.
3.
Click
Devices, expand the Logical Tree, expand
, right-click
, click Add
Bosch ATM/POS-Bridge.
The Add Bosch ATM/POS-Bridge dialog box is displayed.
4.
Type a name as desired and type the settings that you configured earlier.
5.
Click the Inputs tab and select the required inputs.
6.
Click
to save the settings.
7.
Click
Events.
8.
Expand ,
expand
POS Bridge Input, click Data Input.