EIKI LC-X7 用户指南

Select Digital zoom +. The On-Screen Menu disappears and 

“D. zoom +” appears. Press the SELECT button to expand the 
image size. Use the Point ed7 8 buttons to pan the image. 

The Panning function can work only when the image is larger 

than the screen size.

You can also enter the Digital zoom + mode by pressing the 

D.ZOOM button on the remote control.

Select Digital zoom –. The On-Screen Menu disappears and 

“D.zoom –” appears. Press the SELECT button to compress the 

image size. 

You can also enter the Digital zoom – mode by pressing the 

D.ZOOM button on the remote control.

To exit the Digital Zoom +/– mode, press any button except the 

D.ZOOM , SELECT, and Point buttons.

This function is used to store or reset the keystone correction 

when the Main On/Off Switch is pressed to Off or the AC 
power cord is unplugged.  Use the Point 7 8 buttons to switch 

between each option. 

  Store. . .  Keep the keystone correction even when the Main 

On/Off Switch is pressed to Off or the AC power 

cord is unplugged.

  Reset . .  Release the keystone correction when the Main On/

Off Switch is pressed to Off or the AC power cord is 

unplugged.

To correct keystone distortion, press the Select button. The 
Keystone dialog box appears. Use the Point ed7 8 buttons to 

correct keystone distortion. (p.30)

When this function is set to “On,” the picture is top/bottom and 

left/right reversed. This function is used to project the image 

from a ceiling-mounted projector.

When this function is set to “On,” the picture is left/right 

reversed. This function is used to project the image from the 

rear of the screen.

This function returns all adjusted values to the factory default 

settings. Press the SELECT button at Reset to display a 

confirmation box. To reset, press the SELECT button at “Yes.”

Move the red frame pointer to the desired 

function and press the SELECT button.

Exit the Screen Size Adjustment Menu.

✔