Lexmark 1200 安装指南
![Lexmark](https://files.manualsbrain.com/attachments/878cae5fca737841ce37f41a7ee73881a8b54f60/common/fit/150/50/823435a5b9c868f91a4b7f8b99ddfd9b9c699edf1f6ff104003e82a92d7f/brand_logo.png)
59
Verify setup
Step 8: Verify setup
Print the menu settings page to review the default printer
settings and to verify that printer options are installed cor-
rectly. For more information about using the printer oper-
ator panel and changing menu settings, refer to the User’s
Guide.
settings and to verify that printer options are installed cor-
rectly. For more information about using the printer oper-
ator panel and changing menu settings, refer to the User’s
Guide.
1
Make sure the printer is turned off (O).
2
Plug one end of the power cord into the connector
at the back of the printer and the other end into a
properly grounded electrical outlet.
at the back of the printer and the other end into a
properly grounded electrical outlet.
3
Turn the printer on ( | ).
Installing new photoconductors adds to the warm-
up time the printer requires after you turn it on.
During this period, the messages
up time the printer requires after you turn it on.
During this period, the messages
Performing Self Test
and
Engine Warming
appear on the operator panel
display. After the printer completes its internal tests,
the
the
Ready
status message is displayed.
Power switch