Datamax m-class mark ii 用户指南

下载
页码 100
 
Important Safety Instructions 
This printer has been carefully designed to provide many years of safe, reliable performance. As 
with all types of electrical equipment, however, there are a few basic precautions you should take 
to avoid hurting yourself or damaging the equipment: 
 
•  Carefully read the provided installation and operating instructions.  
•  Read and follow all warning instruction labels on the printer. 
•  Place the printer on a flat, firm, solid surface.  
•  Make sure all openings on the printer remain unblocked; never insert anything into the 
openings or ventilation slots.  
•  Do not place the printer near a heat source. 
•  Do not use your printer near water, or spill liquid into it. 
•  Be certain that your power source matches a listed voltage rating for the printer (if unsure, 
check with your dealer or local utility company). 
•  Do not place the power cord where it can be stepped on; and, if the power cord becomes 
damaged, immediately replace it. 
•  If service is required, use only qualified trained technicians to repair your printer. 
 
Agency Compliance and Approvals  
 
 
UL60950-1; 1
st 
 Edition, 2006-07-07 
CSA C22.2 No. 60950-1-03 1
st 
 Edition; 2006-07 
 
 
 
EN60950-1 (2001) 1
st
 Edition 
IEC60950-1 (2001) 1
st
 Edition 
 
 
 
 
As an Energy Star Partner, the manufacturer has determined that this product meets the 
Energy Star guidelines for energy efficiency. 
 
 
 
The manufacturer declares under sole responsibility that this product conforms to the following 
standards or other normative documents: 
 
EMC: EN 55022 (1993) Class B 
         EN 50024 (1998)  
 
Safety: This product complies with the requirements of EN 60950-1, 1
st 
Edition 
 
 
 
Gost-R 
 
GB4943-2001, GB9254-1998, GB17625-1-2003 
 
FCC: 
This device complies with FCC CFR 47 Part 15 Class A.  
 
Note: 
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio 
frequency energy, and if not installed and used in accordance with the instructions in this manual, it may cause 
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause 
harmful interference in which case the user will be required to correct the interference at his own expense.