Sanyo PLC-WXU700A 用户手册

TO MAINTAIN THE LIFE OF THE LAMP, ONCE 

YOU TURN THE PROJECTOR ON, WAIT AT 

LEAST FIVE MINUTES BEFORE TURNING IT 

OFF.

Power off? disappears after 4 seconds.

Press the ON/STAND-BY button on the top control or 

on the remote control, and 

Power off? appears on the 

screen.
Press the ON/STAND-BY button again to turn off the 

projector. The POWER indicator starts to blink red, and 

the cooling fans keep running (You can select the level 

of fans’ quietness and speed. See "Fan" on page 61.). 

At this time, you can unplug the AC power cord even if 

the fans are still running.

When the projector has cooled down enough, the 

POWER indicator stops blinking and you can turn on 

the projector. 



  • When the On start function is set to 

On, the projector 

will be turned on automatically by connecting the AC 

power cord to an AC outlet (p.57).

  • The running speed of cooling fans is changed according 

to the temperature inside the projector.

  • Do not put the projector in a case before the projector is 

cooled enough.

  • If the WARNING indicator blinks or lights red, see 

"WARNING indicator" on page 64.

  • While the POWER indicator is blinking, the lamp is 

being cooled down and the projector cannot be turned 

on. Wait until the POWER indicator stops blinking to turn 

on the projector again.

  • The fan rotation will terminate directly if the AC power 

cord is unplugged immediately after the projector is 

turned off.

  • The projector can be turned on after the POWER 

indicator turns red. The waiting time to restart will be 

shortened when the normal power-off processing for fan 

cooling is completed, compared with the time the AC 

power cord is immediately unplugged after the power-

off. 

DO NOT OPERATE THE PROJECTOR 

CONTINUOUSLY WITHOUT REST. CONTINUOUS 

USE MAY RESULT IN SHORTENING THE LAMP 

LIFE. TURN OFF THE PROJECTOR AND LET 

STAND FOR ABOUT AN HOUR IN EVERY 24 

HOURS.