Sanyo PLC-WXU700A 用户手册

Rotate the Zoom  Lever to zoom in and out.  

Rotate the Focus Ring to adjust the focus of the image.  

If a projected picture still has keystone distortion after 

pressing the AUTO SETUP/CANCEL button on the top 

control or the AUTO SET/CANCEL button on the remote 

control, correct the image manually as follows:

Press the KEYSTONE button on the remote control. The 

Keystone dialog box appears. Use the Point 

▲▼

 buttons to 

correct keystone distortion. The keystone adjustment can be 

stored (see page 49).

Reduce the upper width 
with the Point 

▲

 button. 

Reduce the lower width 
with the Point 

▼

 button.  

• The white arrows indicate that there is no 

correction.

• A red arrow indicates the direction of correction.

• An arrow disappears at the maximum correction.

• If you press the KEYSTONE button on the 

remote control once more while the keystone 

dialog box is being displayed, the keystone 

adjustment will be canceled.

• The adjustable range is limited depending on the 

input signal. 

Auto setup function is provided to automatically execute 

the setting of Auto setup (includes Input search, Auto PC 

adj. and Auto Keystone functions) in the setting menu by 

just pressing the AUTO SETUP/CANCEL button on the top 

control or the AUTO SET/CANCEL button on the remote 

control. Refer to page 48 for the setting of the Auto setup 

function.



  • Auto Keystone corrects vertical distortion only; it does 

not correct horizontal distortion.

  • Auto Keystone cannot work when Ceiling feature is set 

to 

On in the Setting menu (p.53).

  • Perfect correction of the image distortion cannot be 

ensured with the Auto setup function. If the distortion 

cannot be corrected properly by pressing the AUTO 

SETUP/CANCEL or AUTO SET/CANCEL button, adjust 

manually by pressing the KEYSTONE button on the 

remote control or selecting 

Keystone in the Setting 

menu (p.49).

  • 

Fine sync, Total dots, Horizontal and Vertical 

position of some computers cannot be fully adjusted 

with the Auto PC adjustment function. When the image 

is not provided properly with this operation, manual 

adjustments are required (pp.34-35).

POINT ▲▼ buttons

POINT ▲▼buttons

Zoom Lever

Focus Ring