Sanyo PLC-WXU700A 用户手册

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC 

adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format 

and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are 

shown on pages 76-77)

One of the following messages may appear when:

The projector cannot recognize the connected 

signal conforming to the provided PC Systems. 

Auto is displayed on the System Menu box 

and the Auto PC adjustment function works 

to display proper images. If the image is not 

projected properly, a manual adjustment is 

required (pp.34-35).
There is no signal input from the computer. 

Check the connection between your computer 

and the projector. (See “Troubleshooting” on 

pp.69-72.)

The preset system is manually adjusted in the 

PC adjust Menu. The adjusted data can be 

stored in

 Mode 1-5 (pp.34-35).

PC Systems provided in this projector is chosen.  

The projector chooses a proper system provided 

in the projector and displays it.  

*

Mode 1 and SVGA 1 are examples.  

PC system can also be selected manually.

The PC System Menu  

Selected system is  

 

displayed.

Press the MENU button to display the On-Screen 

Menu. Use the Point 

▲▼

 buttons to select 

Input and 

then press the Point 

►

 or the SELECT button. 

Use the Point 

▲▼

 buttons to select 

Systerm and then 

press the Point 

► 

or the SELECT button.

Use the Point 

▲▼

 buttons to select the desired system 

and then press the SELECT button.

RGB(Computer 1)

Systems in this dialog box 

can be selected.

Customized 

Mode (1–5) 

set in the PC adjust Menu 

(pp.34-35).