Sanyo PLC-WXU700A 用户手册

Choose 

Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the 

remote control; choose 

HDMI by pressing the INPUT button on the top control or press the HDMI button on the 

remote control. 

Before  using  these  buttons,  correct  input  source  should  be  selected  through  Menu  operation  as  described 

below.

Use the Point 

▲▼

 buttons to select 

Computer 1 and 

then press the Point 

► 

button; use the Point 

▲▼

 

buttons to select 

HDMI, and then press the SELECT 

button.

When the input source is coming from video 

equipment connected to the COMPUTER 

IN 1/COMPONENT IN terminal with a 

Component-VGA Cable, select 

Component. 

When the input source is coming from video 

equipment connected to the COMPUTER 

IN 1/COMPONENT IN terminal with a Scart-

VGA Cable, select 

RGB (Scart). 

Press the MENU button to display the On-Screen 

Menu. Use the Point 

▲▼

 buttons to select 

Input and 

then press the Point 

►

 or the SELECT button. 



Note: 

  • 

Network is for the Network function. See the owner’s 

manual of “Network Set-up and Operation” .

  • When the Input Search function is set to 

On1 or On, 

the input signal will be searched automatically (p.48).

When 

Computer 1 is selected, use the Point 

▲▼

 

buttons to select 

Component or RGB(Scart) and then 

press the SELECT button.



When  the  video  signal  is  connected  to  the 

HDMI terminal, select 

HDMI.



 

COMPUTER  can not be selected when using the COMPUTER IN 2/

     MONITOR OUT terminal as MONITOR OUT output.