Sanyo PLC-WXU700A 用户手册

Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe 

accident or fire hazard.

This projector can project the picture upward, downward or backward, perpendicular to the plane of the screen as 

shown in the figure below.

Avoid positioning the projector as described below when installing.

Do not roll the projector more than 10 degrees from side to side. 

Do not put the projector on either side to project an image. 

10˚

10˚

10˚

10˚

10˚

10˚

In upward projection, do not tilt the projector over 10 degrees right and left.

In downward projection, do not tilt the projector over 10 degrees right and left.

0º

90º

180 º

40º

50º

140º

50º

40º

Be sure to set the Lamp control in High and the Fan control in On 3 in the 

setting menu when using the projector inclined at between +40 degrees 

to +140 degrees to the horizontal plane at altitudes between 0 and 

approximately 1,600 meters above sea level.
Be sure to set the Fan control in On 2 when using the projector at higher 

altitudes than the altitudes described above, regardless of the installation 

position of the projector. (p.61).