Sanyo PLC-WXU700A 用户手册

Check the indicators for projector condition.                                   

• • • green

• • • red

• • • off

• • • blinks green

When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator 

lights yellow, replace the projection lamp with a new one promptly.

The projector is off. (The AC power cord is unplugged.)

The projector is in stand-by mode. Press the ON/STAND-BY button 

to turn on the projector.

POWER

LAMP 

REPLACE

WARNING 



The projector is preparing for stand-by or the projection lamp is 

being cooled down. The projector cannot be turned on until cooling 

is completed and the POWER indicator stops blinking.



The temperature inside the projector is abnormally high. The 

projector cannot be turned on. When the projector is cooled down 

enough and the temperature returns to normal, the POWER 

indicator stops blinking and the projector can be turned on. (The 

WARNING indicator keeps blinking.) 



The projector detects an abnormal condition and cannot be turned 

on. Unplug the AC power cord and plug it again to turn on the 

projector. If the projector is turned off again, unplug the AC power 

cord and contact the dealer or the service center for service and 

checkup. Do not leave the projector on. It may cause an electric 

shock or a fire hazard.



The projector is operating normally. 



The projector is in the Power management mode. 





The projector has been cooled down enough and the temperature 

returns to normal. When turning on the projector, the WARNING 

indicator stops blinking. Check and clean the filters.

• • • blinks red