Lexmark X850e 连接指南
Printing guide
Page 1 of 3
Page 1 of 3
Printing guide
Get the most out of your printer by properly loading the
trays and setting the types and sizes. Never mix paper
types within a tray.
trays and setting the types and sizes. Never mix paper
types within a tray.
Note: Paper Size does not need to be adjusted
when auto size sensing is enabled. Auto
size sensing is enabled by default for
printer trays, but is not available for the
multipurpose feeder.
size sensing is enabled by default for
printer trays, but is not available for the
multipurpose feeder.
Loading paper
Your printer supports a wide variety of paper types,
sizes, and weights. Both standard and optional trays
are marked with maximum stack height indicators.
sizes, and weights. Both standard and optional trays
are marked with maximum stack height indicators.
To help prevent jams:
•
Flex all stacks
of print media
back and forth
to loosen them,
and then fan them before loading. Do not fold or
crease the print media. Straighten the edges of
the stack on a level surface.
of print media
back and forth
to loosen them,
and then fan them before loading. Do not fold or
crease the print media. Straighten the edges of
the stack on a level surface.
•
Do not exceed the maximum stack height.
Overfilling may cause jams.
Overfilling may cause jams.
Loading a 500-sheet tray
1 Remove the tray and place it on a flat, level
surface.
2 Squeeze the
front guide lever
and slide the
guide to the
front of the tray.
and slide the
guide to the
front of the tray.
3 Squeeze the
side guide lever
and slide the
guide to the
correct position
for the size
paper you are loading.
and slide the
guide to the
correct position
for the size
paper you are loading.
4 Flex the sheets back and forth to loosen them,
and then fan them.
Do not fold or crease the paper. Straighten the
edges of the stack on a level surface.
edges of the stack on a level surface.
5 Place the paper in the tray as shown, print side
down.
Do not load bent or wrinkled paper.
Note: Do not exceed the maximum stack
height. Overfilling the tray may cause
jams.
jams.
6 Squeeze the front
guide lever and slide
the guide until it
firmly touches the
stack of paper.
the guide until it
firmly touches the
stack of paper.
7 Reinstall the tray.
Make sure the tray is
pushed completely
into the printer.
pushed completely
into the printer.
Maximum stack
height indicator
height indicator