Lexmark W810 用户指南

Managing memory

Formatting flash memory or disk erases all information currently stored on the device and 
prepares the device to receive new resources. The files are not recoverable. The printer 
displays a message on the operator panel if a device requires formatting before you can 
download resources.

The following error messages may appear if the printer does not have enough memory to 
process a print job or complete other printer functions.

The printer lacks the memory needed to enable Resource 
Save. This message usually indicates too much memory is 
allocated for one or more of the printer link buffers.

• Press 

 to disable Resource Save and continue printing.

• To enable Resource Save after you get this message:

– Make sure the link buffer is set to Auto, and exit the menus 

to activate the link buffer changes. When 

 is dis-

played, enable Resource Save from the Setup Menu.

– Install additional memory.

The printer memory (or optional disk, if installed) does not have 
the space necessary to collate the print job.

• Press 

 to print the portion of the job already stored and 

begin collating the rest of the job.

• Cancel the current job. Press 

 or 

. The Job 

Menu is displayed. Press 

 or 

 until 

 

appears on the second line of the operator panel display. 
Press 

.

The printer cannot defragment flash memory because the 
printer memory used to store undeleted flash resources is full.

Press 

 to clear the message.

To avoid another 

error

message:

• Delete fonts, macros, and other data in printer memory.
• Install additional printer memory.