Lexmark W810 用户指南

Changing printer settings

Use the Parallel Menu to change settings affecting jobs sent to the printer through the 
parallel interface connection. You must first select either Std Parallel or Parallel Opt 

x

before selecting from the following menu items.

PCL SmartSwitch

= Off
= On*

If PCL SmartSwitch is set to On, the printer examines the data 
on the parallel interface connection and selects PCL emulation 
if the data indicates that is the printer language.

If both PCL SmartSwitch and PS SmartSwitch are set to Off, 
the printer uses the language specified in the Printer Language 
menu as the default. If only one SmartSwitch setting is set to 
On, the printer uses that language as the default.

PS SmartSwitch

= Off
= On*

If PS SmartSwitch is set to On, the printer examines the data on 
the parallel interface connection and selects PostScript 
emulation if the data indicates that is the printer language.

If both PCL SmartSwitch and PS SmartSwitch are set to Off, 
the printer uses the language specified in the Printer Language 
menu as the default. If only one SmartSwitch setting is set to 
On, the printer uses that language as the default.

* Factory default