Lexmark W810 用户指南

Changing printer settings

Use the Configuration Menu to change printer operation settings. You can access this 
menu by pressing the 

 and 

 buttons when you turn on the printer.

Maint Counters

= Reset Hole Punch
= Reset Fuser
= Reset Transfer

When you empty the hole punch box on the optional finisher, 
replace the fuser, or install the transfer kit, you must reset the 
printer’s internal page counter. 

Press 

 to initiate the reset operation for the appropriate 

counter. Refer to the 

User’s Reference for more information 

about resetting the printer’s internal counter.

Registration

Top Margin

= -50 – 50 (0*)

Tray 

x Left Mar

= -50 – 50 (0*)

Use the Registration menu item to adjust the registration for the 
top margin on all the paper trays at one time, and adjust the left 
margin for any individual paper tray. One unit of measure 
represents 1/300 of an inch, providing a range slightly greater 
than +\- 4 mm.

Select the margin you want to adjust, scroll through the range of 
values for that margin, and then press 

. The value 

becomes the current setting and the printer prints a test page 
with the new setting.

Prt Quality Pgs

Press 

 to print the quality test pages. The first page 

contains a combination of graphics and text. The remaining 
pages contain graphics only.

Note:  Make sure Paper Size in the Paper Menu is set to Letter, 
Legal, or A4.

Panel Menus

= Disable
= Enable*

Select Disable to lock the operator panel menus. Select Enable 
to unlock the operator panel menus. See “Disabling operator 
panel menus” on page 31 for more information.

* Factory default