Lexmark W810 安装指南

149

Verify setup

When the correct paper size appears on the second line of
the display, press

Select

again to save the size as the

default for tray 1.

If you need to change the Paper Size setting for another
source, press

Menu>

to scroll to the appropriate source,

and then repeat steps 5 through 7.

When you are finished changing the Paper Size settings,
press the

button to return the printer to the Ready

state.

Linking trays

If you load the same paper size and type in more than one tray, the
printer automatically links the trays: when one tray is empty, paper
feeds from the next linked tray. By linking the trays on the standard
Optra W810 printer model, you can effectively create a single paper
source that holds up to 1250 sheets. If you installed an optional
drawer, you can also link that tray for a total capacity of 1750 sheets
or 3750 sheets, depending on the capacity of the optional drawer.

When the printer is shipped from the factory, tray linking is not
enabled. The factory default Paper Types for the three standard trays
are:

•

Tray 1 = Custom Type 6

•

Tray 2 = Plain Paper

•

Tray 3 = Custom Type 3

To initiate tray linking:

Load paper of the same size and type in all the trays you
want to link.

See page 121 for complete paper loading instructions.

Make sure the printer recognizes the same paper size is
loaded in each tray:

If you’re linking tray 1, make sure you selected the cor-
rect size from the Tray 1 Size menu.

See page 148 for more information.