Lexmark W810 安装指南
164
Set up network addresses
AppleTalk
network printing
Each Macintosh user on the AppleTalk network who wants to use the
printer needs to complete the following steps:
printer needs to complete the following steps:
Note:
A PPD file customizes
the LaserWriter driver for your
particular printer model.
particular printer model.
1
In the Chooser, select the LaserWriter 8 driver.
2
Select the new printer.
— If you have a routed network, you must select the new
printer from the default zone for the network. If you do not
know which zone to select, look on the network setup page
under AppleTalk for Zone.
know which zone to select, look on the network setup page
under AppleTalk for Zone.
— If you do not know which printer to select, look on the net-
work setup page under AppleTalk. The default name of the
printer is listed beside Name.
printer is listed beside Name.
3
Click
Create
.
4
If you are prompted to select the PPD (PostScript Printer
Description), follow these steps to install the proper PPD
from the
Description), follow these steps to install the proper PPD
from the
Drivers, MarkVision and Utilities CD:
a
Launch the CD.
b
Click
Lexmark Installer
.
c
Select the appropriate PPD for your printer.
d
Click
Install
.
e
Go back to the Chooser and try to create the new
printer again.
printer again.
5
Look for an icon to appear in the Chooser next to the
printer name.
printer name.
This means a PPD is associated with the network printer. A
new desktop printer icon is also placed on your desktop.
new desktop printer icon is also placed on your desktop.
6
In the Chooser, select the printer you want to use now, and
then close the Chooser window.
then close the Chooser window.
If you experience problems setting up AppleTalk, refer to the docu-
mentation on the
mentation on the
Drivers, MarkVision and Utilities CD. After launching
the CD, click
View Documentation
and then click
MarkNet Print
Servers
.