Lexmark W810 安装指南
vii
Preface
Preface
About your printer
Three printer models are available:
•
The Optra W810 printer, deliver-
ing 600 dots per inch (dpi)
resolution at up to 35 pages per
minute (ppm), ships with one 250-
sheet tray and two 500-sheet
trays. The W810 printer comes
with 16MB of standard memory.
ing 600 dots per inch (dpi)
resolution at up to 35 pages per
minute (ppm), ships with one 250-
sheet tray and two 500-sheet
trays. The W810 printer comes
with 16MB of standard memory.
•
The W810n, a network model,
comes with an Ethernet 10/
100BaseTX print server installed
and 16MB of standard memory.
comes with an Ethernet 10/
100BaseTX print server installed
and 16MB of standard memory.
•
The W810dn, a network model
with duplexing capabilities,
comes with 32MB of standard
memory.
with duplexing capabilities,
comes with 32MB of standard
memory.
The illustrations in this manual represent
the Optra W810 model, with the configu-
ration shown at the left, unless it’s
necessary to show another configura-
tion. Depending on the printer model you
have chosen and the options you install,
your printer may look different.
the Optra W810 model, with the configu-
ration shown at the left, unless it’s
necessary to show another configura-
tion. Depending on the printer model you
have chosen and the options you install,
your printer may look different.
The figure on the following page illus-
trates the Optra W810 and all the
available paper handling options.
Instructions for installing these options
are included in this manual.
trates the Optra W810 and all the
available paper handling options.
Instructions for installing these options
are included in this manual.
Tray 1
Tray 2
Tray 3
Operator
panel
panel
Message map
Toner box
(Cover A)
(Cover A)
Fuser cover
(Cover B)
(Cover B)
Side door
(Door C)
(Door C)
Jam access door
(Door D)
(Door D)
Jam access door
(Door E)
(Door E)
On/off
button
button
Standard
output bin
output bin