Lexmark E360d 用户指南
4
Squeeze the tab located on the right width guide to adjust the guides to lightly touch the sides of the stack.
5
Slide the paper gently into the multipurpose feeder until it comes to a stop. Paper should lie flat in the
multipurpose feeder. Make sure the paper fits loosely in the multipurpose feeder and is not bent or wrinkled.
multipurpose feeder. Make sure the paper fits loosely in the multipurpose feeder and is not bent or wrinkled.
6
From the printer control panel, set the Paper Size and Paper Type.
Paper capacities
The capacities of the trays and the multipurpose feeder are based on 75 g/m
2
(20 lb) paper.
Load up to
Notes
Tray 1
250 sheets of paper
150 sheets of A6-size paper
50 paper labels
50 paper labels
50 transparencies
Note: Vinyl, pharmacy, or dual-sided labels are not supported. Use
paper labels only. Single-sided paper labels designed for laser
printers are supported for occasional use. It is recommended to
print no more than 20 pages of paper labels per month.
paper labels only. Single-sided paper labels designed for laser
printers are supported for occasional use. It is recommended to
print no more than 20 pages of paper labels per month.
Tray 2
250 or 550 sheets of paper
50 paper labels
Note: Only one optional drawer may be installed on the printer at
a time. The maximum amount of paper that can be loaded
depends on whether you have an optional 250- or 550-sheet tray.
a time. The maximum amount of paper that can be loaded
depends on whether you have an optional 250- or 550-sheet tray.
Loading paper and specialty media
36