GE im4a 安装指导

Problem

Possible Causes

What To Do

Leaking water around

Foam in the fill cup from

• If the fill tube was installed by sliding it through the back

the fill cup

installing the fill tube.

of the refrigerator, it may have picked up pieces of foam
as it was pushed through. This foam can interfere with
the water flow in the fill cup. Check the cup and make
sure there are no foam pieces.

Fill tube not correctly seated

• Check that the fill tube is

in the fill cup.

correctly inserted in the
fill cup opening. See Mount
the icemaker.

Leaking water behind

House supply not properly

• Check that the house supply is firmly attached to

the refrigerator

connected to the water valve.

the water valve. See Water line installation instructions.

Water line not connected

• Check that the plastic

to the water tube inlet.

water line running from
the valve to the water tube
inlet is firmly attached with
the hose clamp. See Connect
the water line.

Slow ice/freezer not

Door left open.

• Check to see if package is holding door open.

cold enough

Temperature control not

• See About the Temperature Control.

set cold enough.

Ice cubes too small/

Water shutoff valve connecting

• We recommend drilling a 1/4

″ hole

slow ice

refrigerator to house water line

in the water pipe to connect the water

may be clogged.

shut-off valve. Failure to drill a 1/4

″

hole may result in reduced ice
production or smaller cubes.
See Installing the water line.

Water line kinked.

• Check that the plastic water

line running from the valve
to the water tube inlet is not
kinked. See Connect the
water line. A kink in the
water line will restrict flow
to the icemaker.

ge.com

Fill Tube

Fill
Tube

Fill
Cup

Water
Tube Inlet

Hose Clamp

Water Line

Adhesive-backed
Fasteners for
Water Tube

Drill 1/4

″ hole

in water pipe