Lexmark z11 用户指南
Chapter 3
18
Printing banners
Before you begin, remove any paper from the sheet feeder.
1
The banner paper holder holds up to 20 sheets, but load only
the number of sheets you will need to make your banner. For
example, if your banner is 12 sheets long, load 12 sheets into
the printer.
the number of sheets you will need to make your banner. For
example, if your banner is 12 sheets long, load 12 sheets into
the printer.
d
Insert the leading edge of the
first page into the sheet feeder.
first page into the sheet feeder.
c
Place your stack of banner
paper into the paper support.
paper into the paper support.
e
Squeeze the release tab and the
paper guide together, and slide the
paper guide to the edge of the
banner paper.
paper guide together, and slide the
paper guide to the edge of the
banner paper.
a
Pull the paper support up
slightly to unlock the front tabs.
slightly to unlock the front tabs.
b
Tilt the paper support back
until it locks in the horizontal
position as shown.
until it locks in the horizontal
position as shown.
Note
Use banner paper
recommended for inkjets.
We do not recommend
using continuous form
paper intended for dot
matrix printers. Continuous
form paper is designed to
hold a different kind of ink.
recommended for inkjets.
We do not recommend
using continuous form
paper intended for dot
matrix printers. Continuous
form paper is designed to
hold a different kind of ink.