OEM c-8 产品宣传页

下载
页码 1
The Registered Bass 12" In-Floor Subwoofer was designed 
to mount in standard construction frame floors.  With proper 
preparation it may also be mounted in ceilings.  The 
revolutionary and space saving design installs from above 
the floor (or below the ceiling).  In other words, installation 
easily takes place from within the living space, not under the 
floor.
A standard sized 6" x 14" HVAC register vent is used to 
trim/dress the opening.  No register is included with the unit.  
The customer chooses a standard 6" x 14" sized register 
vent (diffuser) to match the other registers in the house used 
for the HVAC system.
RB-12 In-Floor Subwoofer
SE-80SWD 
Dimensions: 
Cut-out: 8 3/4" x 8 3/4" x 4" Deep
Overall: 10" x 10"
C-8SW 
Dimensions: 
Cut-out: 9" W x 13" H x 3 13/16" Deep
Overall: 10 1/2" W x 14 1/2" H
C-8SW & SE-80SWD In-Wall Subwoofers
Specifications:
 12" poly woofer with 2" voice coil, butyl surround, protected by stainless steel screen,  
    mounted to enclosure with stainless steel machine screws into stainless T-nuts
 
 Power Handling: 100 Watts nom. 150 Watts max.
 Frequency Response: 25 - 100 Hz
 Sensitivity: 90 dB @ 1 W/m 
 Impedance: 8 Ohms nominal
 Net Weight: 18 lbs.
 Cut-out opening size: 14 1/4" x 6 1/8" x 16 1/2" Deep 
 Top mounting flange inside dimensions: 14 3/16" x 6" x 1 5/16" Deep  (Diffuser Opening)
 Top mounting flange outside dimensions: 15 1/4" x 7 1/16" 
 8" Dual Voice Coil Carbon Fiber Subwoofers with on board cross-overs & switching for high pass output
 Frequency Response: 30 Hz - 120 Hz
 Power Handling: 50 Watts nom. 100 Watts max.
 Impedance: 8 Ohms
OEM Systems Company, Inc.
740 Freeport Blvd., #106
Sparks, Nevada  89431-6168
775 355-0405    Fax 775 355-0646 
www.oemsystems.com
info@oemsystems.com
Available in Single & Dual Voice Coil versions -
 RB-12SW & RB-12SWD